Expo Imaging on Facebook Expo Imaging on You Tube Expo Imaging on Twitter Expo Imaging Email

The New Ray Flash 2 Ring Flash Adapter: Adjustable and Lower Profile

More Photos:  1  2

Ray Flash 2: Universal Ring Flash Adapter




Why Use a Ray Flash 2 Ring Light Adapter?


The Ray Flash 2 is a unique adapter for your hot-shoe flash unit designed to replicate the lighting effect produced by traditional, expensive, and heavy powered studio ring light units.

The Ray Flash 2 creates the distinctive ring light effect:  a three-dimensional shadow-wrapped look around the subject.  Because ring flash light originates from a circle around the lens, it produces a virtually shadowless look on the front of your subject, while producing a soft even shadow around the edges. The versatile Ray Flash is ideally suited for fashion, wedding, portrait, journalist and macro photography as either a main or fill light.

For a selection of images taken with the Ray Flash, visit our Ray Flash Gallery.

The Ray Flash 2 is portable and lightweight, and has been designed to take advantage of a camera’s TTL metering capabilities.
   


How Does the Ray Flash 2 Work?

Because the Ray Flash relies on the hot-shoe flash to generate its light, it contains no electronics, no flash tubes and requires no cumbersome cables.  The light distribution is accomplished through a sophisticated system of internal light-shapers designed to distribute and project the light evenly around the lens.

Ray Flash 2 attaches to the face of a speedlight using an adjustable clamp mount.  Its solid acrylic light guides efficiently direct light from a portable flash unit into a circle around a camera’s lens. It contains no electronics or batteries, instead relying on your speedlight's power to generate light.


How Do I Attach Ray Flash 2 to my Flash and Camera?

Open the Ray Flash 2's adjustable clamp and insert the face of the flash head into the clamp.  Then, attach the speedlight into your hot shoe while sliding the Ray Flash 2's ring over the front of your lens.  A rubber ring included with the Ray Flash 2 can also be used to compensate for any downward angle to the face of the speedlight, ensuring that the Ray Flash 2's ring stays parallel to the front of your camera's lens.



What's New About Ray Flash 2?

The new Ray Flash 2 introduces a universal speedlight mount, adjustable height and a lower profile.  A new, universal, adjustable mount with a spring-loaded clamp allows the Ray Flash 2 to quickly and securely attach to different sizes of speedlights.  The center column of the Ray Flash 2 slides up and down to accommodate variations in camera and speedlight heights.  The Ray Flash 2 is also available in two different versions, long and short, to fit the tallest and shortest DSLR bodies available.  Ray Flash 2’s lower profile compared to the original Ray Flash makes it even more portable for location photographers.

Ray Flash 2 Comes in Two Adjustable Versions, Long and Short.  Which One Should I Order?

Either Ray Flash 2 version will attach to any size flash head.  The Long and Short versions accommodate taller and shorter camera bodies, ensuring that your camera's lens is centered in the Ray Flash ring.  Please locate your camera on the following chart to determine which Ray Flash 2 version will fit your camera body best.

Ray Flash 2 Long (RFU-L)
Camera Brand Camera Model
Canon 30D
  40D
  50D
  60D
  70D
  5D
  5D MKII
  5D MK III
  6D
  7D
  1D
  1DS
  1DX
  1DC
Nikon D7000
  D70
  D80
  D90
  D100
  D200
  D300
  D300s
  D700
  D800
  D1
  D2
  D2x
  D3
  D3x
  D4
Pentax K30
  K5
  K5 II
  K7
Olympus E-5
  OM-D EM-5
FujiFilm FinePix HS50EXR
Ray Flash 2 Short (RFU-S)
Camera Brand Camera Model
Canon 1100D
  100D
  350D
  400D
  450D
  500D
  550D
  600D
  700D
Nikon D3000
  D3100
  D3200
  D5000
  D5200
Sony DSLR-A100
  DSLR-A200
  DSLR-A100
  DSLR-A300
  DSLR-A350
  DSLR-A390L
FujiFilm HS25EXR
  HS28EXR
  HS30EXR
  HS33EXR
  SL280
  SL300
  SL305
  SL1000


Ray Flash 2 Version Sizing/Specifications:

Ray Flash Universal
Model
Outer Circle Diameter Inner Circle Diameter Center of Ring Flash Circle to Center of Flash Head Face Weight
RFS-S (Short) 8.46" (215 mm) 3.93" (100 mm) 6.3"-6.9" (160-175 mm) 16 oz. (454 g)
RFU-L (Long) 8.46" (215 mm) 3.93" (100 mm) 6.9"-7.5" (175-190 mm) 16 oz. (454 g)


Pricing and Availability

The Ray Flash 2: Universal Ring Flash Adapter is now available in the U.S. through photo specialty resellers nationwide, or online at the ExpoImaging Store.  The Ray Flash 2 retails for $139.95.


About Ray Flash 2

Created by Czech photographer and inventor Dalibor Zyka, patented Ray Flash Ring Flash Adapters have made classic ring flash lighting more accessible to location photographers by allowing them to modify their speedlights to create the highly desirable lighting effect.



Features


- Create Ring Light Effects with Your Speedlight
- Lightweight and Portable (16 oz.)
- Shoot Full TTL or Manual